Rodenticides
Speciality Products
Bednet Treatment
Fogging
IRS
Locust Control
PCO
Plant Nutrients
Plant Protection
Deltamethrin 50 g/kg
(S)-α-cyano-3-phenoxybenzyl (1R,3R)-3-(2,2-dibromovinyl)-2,2-dimethylcyclopropane carboxylate

505.2
The material shall consist of a suspension of fine particles of technical Deltamethrin, in an aqueous phase together with suitable formulants. After gentle agitation, the material shall be homogeneous and suitable for further dilution in water.
The pH of an aqueous dispersion shall be 4.5 to 7.5.
Maximum “residue”: 5%
A minimum of 90% of the Deltamethrin content found in suspension after 30 min in CIPAC Standard Water D at 30 ± 2°C
Maximum: 2% retained on a 75 μm test sieve
Maximum: 50 ml after 1 min.
Stability at 0 °C
After storage at 0 ± 2°C for 7 days, the formulation shall continue to comply
with the clauses:
– Suspensibility
– Wet sieve test
After storage at 54 ± 2°C for 14 days, the determined average active ingredient content must not be lower than 95% relative to the determined mean content found before storage and the formulation shall continue to comply with the clauses:
– pH range
– Pourability
– Spontaneity of dispersion
– Suspensibility
– Wet sieve test